Add an output to an operation

This paragraph is not applicable for phantom outputs and their output items.
  1. Choose Recipe Management > Recipes in the Navigation Pane.
  2. Unfold in the Navigation Pane the tree structure of the Recipes and My Recipes, and subsequently the tree structure of the desired recipe, the variant and the version.
  3. Choose the tab Operations and select the operation.
  4. Choose the tab Outputs.
  5. Click Add Output .
  6. Select an item in the dialog box Wizard Add Output.
  7. Click Next.
  8. At Quantity, enter the number of items which will be produced by the operation.
  9. Where applicable, check Fixed if the output is independent of the batch size.
  10. Where applicable, check Intermediate if the output is an intermediate product.
    Example:

    The output of a specific operation results in 100 items A. This output is checked as 'intermediate' when it is used for the input of the operation 'wash' where the 100 items A are again defined as output.

    If this operation is a repair operation, check Intermediate. Otherwise, 2 outputs will be created instead of 1 (see also Add an operation to a recipe).
  11. Click Finish.
  12. Repeat steps 5 up to and including 11 to add more items.

    To change the sequence of the outputs: Select the output and use the arrows to edit the sequence.

    The output added first is set as primary output.

    If you have added multiple outputs, select the output that you want as primary output and click Primary Output .

    The sequence of the items can be used to display the items in the correct sequence in the resource view.

    If required, an input can be copied from on operation to another.